FAQ | CKIC

How to change the colomn that you want to print?

For details, please check:

How to change the colomn that you want to print?.pdf
Upgrade of 5E-MF6100 for ash to apply ASTM D3174

For details, please check:

Upgrade of 5E-MF6100 for ash to apply ASTM D3174.pdf
How to export data report of CKIC calorimeter as Excel file?

For details, please check:

How to export data report of CKIC calorimeter as Excel file?.pdf
Upgrade Instructions of 5E-AC/PL Calorimeter

For details, please check:

Upgrade Instructions of 5E-AC/PL Calorimeter.pdf
5E-C5500 Calorimeter Calibration

For details, please check:

5E-C5500 Calorimeter Calibration.pdf
How to check gas leakage of oxygen bomb?

After charging the bomb and immerged into the water,first make sure where the bubbles were found , from A,B,C or D?(Showed in slide 1)

Then disassemble the bomb :
1. If from A , it must be the damage of small O-ring as showed as a in slide 2. Replacing the O-ring will solve the problem.

2. If from B , it may be the damage of the O-ring as showed as b in slide 2 or the loosen of oxygen bomb head . Replacing the O-ring or re-tight the oxygen bomb head.

3. If from C , it may be the damage of the upper pad or lower pad as showed as c in slide 3 .Replacing the upper pad or lower pad .

4. If from D, it may be the problem of the big O-ring , replace it .

Showing page 3 of 9

Quick Links